JIS – EN steel equivalents
Japanese JIS designations are common not only in Japan but also in machinery and automotive supply chains that work to Japanese drawings and specifications: SCM440, S45C, SUJ2. This page shows the JIS equivalents of the EN grades on this site and explains how the designations are read.
JIS – EN – AISI equivalence table
Click a grade name to open its datasheet.
| EN | W.-Nr. | JIS | Standard | AISI/SAE |
|---|---|---|---|---|
| 42CrMo4 | 1.7225 | SCM440 | JIS G 4053 | 4140 |
| C45 | 1.0503 | S45C | JIS G 4051 | 1045 |
| S235JR | 1.0038 | ≈ SS400 / SM400A | JIS G 3101 / G 3106 | ≈ A36 |
| S355J2 | 1.0577 | ≈ SM490B / SM490YB | JIS G 3106 | ≈ A572 Gr.50 |
| 16MnCr5 | 1.7131 | ≈ SCr415 / SCr420 | JIS G 4053 | 5115 |
| 34CrNiMo6 | 1.6582 | ≈ SNCM447 | JIS G 4053 | ≈ 4340 |
| 25CrMo4 | 1.7218 | SCM430 | JIS G 4053 | 4130 |
| 100Cr6 | 1.3505 | SUJ2 | JIS G 4805 | 52100 |
| C15 | 1.0401 | S15C | JIS G 4051 | ≈ 1015 / 1018 |
| 20NiCrMo2-2 | 1.6523 | SNCM220 | JIS G 4053 | 8620 |
| 11SMn30 | 1.0715 | SUM22 (SUM22L) | JIS G 4804 | 1213 |
| 51CrV4 | 1.8159 | SUP10 | JIS G 4801 | 6150 |
| 39NiCrMo3 | 1.6510 | ≈ SNCM439 | JIS G 4053 | ≈ 9840 |
| 20MnCr5 | 1.7147 | ≈ SCr420 / SMnC420 | JIS G 4053 | 5120 |
| 41Cr4 | 1.7035 | ≈ SCr440 | JIS G 4053 | ≈ 5140 |
| C35 | 1.0501 | ≈ S35C | JIS G 4051 | ≈ 1035 |
| C40 | 1.0511 | ≈ S40C | JIS G 4051 | ≈ 1040 |
| 34CrMo4 | 1.7220 | ≈ SCM435 | JIS G 4053 | ≈ 4135 |
| C60 | 1.0601 | ≈ S58C | JIS G 4051 | ≈ 1060 |
| C22E | 1.1151 | ≈ S20C | JIS G 4051 | ≈ 1020 |
| X5CrNi18-10 | 1.4301 | SUS304 | — | 304 |
| X2CrNiMo17-12-2 | 1.4404 | SUS316L | — | 316L |
| E295 | 1.0050 | ≈ SS490 | JIS G 3101 | — |
| 55Cr3 | 1.7176 | ≈ SUP9 | JIS G 4801 | ≈ 5155 / 5160 |
| 60Si7 | 1.5027 | ≈ SUP6 / SUP7 | JIS G 4801 | ≈ 9260 |
| 11SMnPb30 | 1.0718 | ≈ SUM22L / SUM24L | JIS G 4804 | ≈ 12L14 |
| S275JR | 1.0044 | ≈ SS400 | JIS G 3101 | — |
| C55 | 1.0535 | ≈ S55C | JIS G 4051 | ≈ 1055 |
Equivalents are given for information; analysis ranges may differ slightly from one standard to another. For critical parts, the standard named in your order governs. “≈” marks the nearest grade where no strict equivalent exists.
Rows are generated from the same data as the steel grade datasheets on this site.
How to read JIS designations
- S…C — carbon steels for machine structural use (JIS G 4051): the middle number is the carbon content in hundredths of a percent, S45C → 0.45 % C.
- SCr, SCM, SNCM, SMn, SMnC — alloy steels for machine structural use (JIS G 4053): the letters name the alloy (Cr, Cr-Mo, Ni-Cr-Mo, Mn).
- In alloy steels the first digit codes the main alloy content and the last two digits are the carbon in hundredths of a percent: SCM440 → Cr-Mo, 0.40 % C.
- SUJ — high-carbon chromium bearing steel (JIS G 4805); SUJ2 ≈ 100Cr6.
- SUP — spring steel (JIS G 4801); SUM — free-cutting steel (JIS G 4804).
- SS and SM — rolled steels for general and welded structures (JIS G 3101 / G 3106): the number is the minimum tensile strength, SS400 → 400 MPa.
You can send your enquiry using the JIS designation; we confirm the EN counterpart.
Send us your requirements
Tell us the grade, size and quantity — our team will get back to you within 24 hours.
