Stainless Steel Bars Technical Catalogue

304 and 316 stainless steel round, hexagon, square and flat bars — to EN 10088-3 and ASTM A276 / A479, with EN 10204 3.1 certificates. Supplied from stock or from production partners; stock status for the grade and size is confirmed in the quotation.

Bar Shapes

Select for technical details

Stainless Steel Bars: All types (4)

A short summary of each type is below. Dimension tables, materials and technical notes are on each type's own page.

  • Stainless round bar for shafts, pins, fasteners and corrosion-resistant machine parts.

    Standard:
    EN 10088-3, ASTM A276, ASTM A479
    Material:
    1.4301 (304) · 1.4401 (316) · 304L / 316L on request
    Technical page
  • Stainless hexagon bar for nuts, unions and fittings, machined with less waste than round stock.

    Standard:
    EN 10088-3, ASTM A276, ASTM A479
    Material:
    1.4301 (304) · 1.4401 (316) · 304L / 316L on request
    Technical page
  • Stainless square bar for machine parts, structural components and milled square-profile parts.

    Standard:
    EN 10088-3, ASTM A276, ASTM A479
    Material:
    1.4301 (304) · 1.4401 (316) · 304L / 316L on request
    Technical page
  • Stainless flat bar for brackets, connecting straps and plant structures, ordered as width × thickness.

    Standard:
    EN 10088-3, ASTM A276, ASTM A484
    Material:
    1.4301 (304) · 1.4401 (316) · 304L / 316L on request
    Technical page

Detailed Technical Information and Quotation

Contact our expert team for detailed technical documents, application recommendations, and custom size quotations regarding this product type.

Get a Quote

Grade datasheets

Chemistry, mechanical properties and equivalents of the steel grades used for this product:

Quotation for stainless bars

Send the grade (e.g. 1.4404 / 316L), shape and size, finish, tolerance, quantity and the certificate you need. Stock status, minimum quantity, lead time, payment and sample terms vary by product and are stated in each quotation.

Get a Quote

What are stainless steel bars?

Stainless steel bars are long products of corrosion-resistant steel with at least 10.5% chromium, in round, hexagon, square or flat section (EN 10088-1). The most common grades are austenitic 1.4301 (AISI 304) and molybdenum-alloyed 1.4401 / 1.4404 (AISI 316 / 316L); they are supplied to EN 10088-3 in Europe, ASTM A276 in the US and ASTM A479 for pressure equipment. Aktif Çelik supplies 304 and 316 bars with an EN 10204 3.1 certificate, from stock or from production partners.

304 or 316? Choosing finish and tolerance

304 (1.4301) is the basic grade, with sufficient corrosion resistance for atmospheric service, food and general chemical equipment. 316 (1.4401) and 316L (1.4404) contain 2.0–2.5% molybdenum and are markedly more resistant to pitting in chloride-bearing media (sea air, salt water, some chemicals). The L stands for low carbon (C ≤ 0.030%), which reduces the risk of intergranular corrosion after welding; for welded parts choose 304L (1.4307) or 316L. Hot rolled and pickled bar is the economical stock for machined parts. Peeled (h11), cold drawn (h9 / h11) and ground (h9) bars are for shafts, pins and fittings that need a bright surface and a tight tolerance — all on request (ISO 286-2, EN 10278).

Grade designations: EN, material number, AISI, UNS

EN nameW.-Nr.AISIUNS
X5CrNi18-101.4301304S30400
X2CrNi18-91.4307304LS30403
X5CrNiMo17-12-21.4401316S31600
X2CrNiMo17-12-21.4404316LS31603

These are close equivalents; EN 10088 and ASTM analysis ranges are not identical (e.g. C ≤ 0.07% for 1.4301, C ≤ 0.08% for ASTM 304). State the governing standard in the order.

Frequently Asked Questions

Do you supply stainless bars from stock?+

Yes. We supply stainless bars from stock or from our production partners. Whether the requested grade, size, length and finish are in stock is confirmed in the quotation.

What is the difference between 304 and 316?+

316 contains at least 2% molybdenum (2.0–2.5% in EN 1.4401 / 1.4404, 2.0–3.0% in ASTM A276 / A479) and is markedly more resistant than 304 to pitting in chloride-bearing media. Choose 304 for atmospheric service and food equipment, 316 / 316L for marine service and salt water; L grades are preferred for welded parts.

Which standard and certificate come with the bars?+

Bars are delivered to EN 10088-3 or ASTM A276 / A479 with an EN 10204 3.1 inspection certificate. Third-party inspection by independent bodies such as SGS, Bureau Veritas or TÜV is arranged on request.

What are the minimum order quantity, lead time and payment terms?+

They vary by product, size and finish; there is no fixed figure. Minimum quantity, lead time, payment and sample terms are stated separately in each quotation.

Related Production Processes