Stainless Steel Round Bar
Stainless round bar for shafts, pins, fasteners and corrosion-resistant machine parts. Supplied in 1.4301 (304) and 1.4401 (316), plus 1.4307 (304L) and 1.4404 (316L) on request, hot rolled, peeled, cold drawn or ground.

Technical Specifications
Key Features
- Grades 1.4301 (304) and 1.4401 (316), plus 1.4307 (304L) and 1.4404 (316L) on request
- To EN 10088-3 or ASTM A276 / A479; state any dual-certification need (304/304L, 316/316L) in the enquiry
- Hot rolled, peeled, cold drawn or centreless ground finish — on request
- Tolerance class h9 / h11 for bright bar (ISO 286-2, EN 10278)
- EN 10204 3.1 inspection certificate; third-party inspection by bodies such as SGS, Bureau Veritas or TÜV on request
- Supplied from stock or from production partners; stock status for the grade and size, quantity and lead time are confirmed in the quotation
Applications
- Pump and valve shafts
- Food, beverage and pharmaceutical equipment parts
- Chemical and process plant equipment
- Stock for bolts, studs and pins
- Parts in marine service and chloride-bearing water (316 / 316L)
Finish and Tolerance Options
| Surface / process | Tolerance (on request) | Notes |
|---|---|---|
| Hot rolled, solution annealed, pickled | EN 10060 | Economical stock for parts to be machined |
| Peeled (turned) | h11 (EN 10278) | Scale and surface defects removed by machining |
| Cold drawn | h9 / h11 (EN 10278) | Bright surface; work-hardens during drawing |
| Centreless ground | h9 (EN 10278) | Best finish and tight diameter tolerance; shafts and pins |
Technical Notes
- 01304 (1.4301) is the basic grade for general corrosion resistance; in chloride-bearing media the 2.0–2.5% molybdenum grades 316 / 316L (1.4401 / 1.4404) are preferred (EN 10088-3).
- 02L grades (304L / 316L) are low-carbon (C ≤ 0.030%) and reduce the risk of intergranular corrosion in welded parts.
- 03Austenitic stainless steel does not harden by heat treatment; solution annealed (+AT) it is practically non-magnetic, and cold drawing can cause slight magnetism.
- 04State the EN 10088-3 finish code in the enquiry, e.g. 1D (hot formed, heat treated, pickled), 1X (rough machined / peeled), 2H (cold worked / drawn), 2G (centreless ground).
Stainless Steel Round Bar: grades, standards and selection notes
This page covers Stainless Steel Round Bar, part of our Stainless Steel Bars range. Grades named for this type: 1.4301 (304) · 1.4401 (316) · 304L / 316L on request. It is supplied to EN 10088-3 (stainless steel bars, rods, wire and sections for general purposes), ASTM A276 (stainless steel bars and shapes) and ASTM A479 (stainless steel bars and shapes for boilers and other pressure vessels).
Reference grades with the chemical composition (wt %) and strength values of the standard: X5CrNi18-10 (W.-Nr. 1.4301 · AISI/SAE 304 · JIS SUS304): C ≤ 0.07, Cr 17.5–19.5, Ni 8.0–10.5, Rm 500–700 MPa, Rp0.2 ≥ 190 MPa (+AT, d ≤ 160 mm). X2CrNiMo17-12-2 (W.-Nr. 1.4404 · AISI/SAE 316L · JIS SUS316L): C ≤ 0.030, Cr 16.5–18.5, Mo 2.00–2.50, Ni 10.0–13.0, Rm 500–700 MPa, Rp0.2 ≥ 200 MPa (+AT, d ≤ 160 mm). The grade datasheets linked below carry the full tables and equivalents. Finish and tolerance options in the table: Hot rolled, solution annealed, pickled – EN 10060; Peeled (turned) – h11 (EN 10278); Cold drawn – h9 / h11 (EN 10278); Centreless ground – h9 (EN 10278).
A round bar is ordered by its diameter d. With the density of 1.4301 given in EN 10088-1 (7.9 kg/dm³), the mass is about 0.00620 × d² kg/m (d in mm): a 50 mm round weighs about 15.5 kg/m, and 1.4401 (8.0 kg/dm³) is slightly heavier. Rounds are the usual starting stock for shafts, pins and turned parts.
How the other types differ, according to their data: Stainless Steel Hexagon Bar: hot-rolled tolerances EN 10061; tolerance h11 (ISO 286-2), on request. Stainless Steel Square Bar: hot-rolled tolerances EN 10059; tolerance h11 (ISO 286-2), on request. Stainless Steel Flat Bar: hot-rolled tolerances EN 10058; tolerance h11 (ISO 286-2), on request; standards EN 10088-3, ASTM A276, ASTM A484. The grade choice does not depend on the shape: 304 (1.4301) for general corrosion resistance, 316 (1.4401) with 2.0–2.5% molybdenum in chloride-bearing media, and the L grades (C ≤ 0.030%) for welded parts.
To request a quotation for Stainless Steel Round Bar, state the grade (for example X5CrNi18-10), size, tolerance class (h9 / h11 (ISO 286-2), on request), the standard (EN 10088-3), length and quantity. Material is supplied with an EN 10204 3.1 inspection certificate; third-party inspection by bodies such as SGS, Bureau Veritas or TÜV is arranged on request. Whether the size can be supplied from stock, the minimum quantity and the lead time are stated in the quotation, which is sent within 24 hours.
Grade datasheets
Chemistry, mechanical properties and equivalents of the steel grades used for this product:
Grade comparisons
What are stainless steel bars?
Stainless steel bars are long products of corrosion-resistant steel with at least 10.5% chromium, in round, hexagon, square or flat section (EN 10088-1).
Stainless Steel Bars: guide and FAQRelated Blog Posts
Technical articles, guides and industry analyses
Is Steel Magnetic? Which Steels Are Not Magnetic?
The vast majority of steels are magnetic — but not all. What decides it is not the alloy but the crystal structure: ferrite/martensite attracts, austenite doesn't. Why 304/316 stainless doesn't stick, and where the magnet test reaches its limits.

h9, h10, h11 Tolerances for Bright Steel Bars: How to Choose
For bright bars, h9, h10 and h11 are ISO 286 shaft tolerance classes: the upper deviation is zero and the lower deviation is negative, depending on diameter. We explain which production route gives which tolerance, what the difference between h9 and h11 means in microns, and what else must be written on the order next to the tolerance.
