Stainless Steel Bars / SS-SQR

Stainless Steel Square Bar

Stainless square bar for machine parts, structural components and milled square-profile parts. Supplied in 1.4301 (304) and 1.4401 (316), plus 1.4307 (304L) and 1.4404 (316L) on request, hot rolled or cold drawn.

Technical Specifications

Grades
1.4301 (304) · 1.4401 (316) · 304L / 316L on request
Tolerance
h11 (ISO 286-2), on request
Size
Side length on request — confirmed in the quotation
Standards
EN 10088-3, ASTM A276, ASTM A479

Key Features

  • Square section; stock for milled parts and square-profile components
  • Grades 1.4301 (304) and 1.4401 (316), plus 1.4307 (304L) and 1.4404 (316L) on request
  • To EN 10088-3 or ASTM A276 / A479
  • Hot rolled (EN 10059) or cold drawn h11 (EN 10278) — on request
  • EN 10204 3.1 inspection certificate; third-party inspection by bodies such as SGS, Bureau Veritas or TÜV on request
  • Supplied from stock or from production partners; stock status for the grade and size, quantity and lead time are confirmed in the quotation

Applications

  • Machine and structural parts
  • Milled square-profile components
  • Support parts in food and chemical plants
  • Architectural and decorative work

Finish and Tolerance Options

Surface / processTolerance (on request)Notes
Hot rolled, solution annealed, pickledEN 10059Defined by side length (a)
Cold drawnh11 (EN 10278)Bright surface, tight size tolerance

Technical Notes

  • 01Tolerances are defined by EN 10059 for hot-rolled and by EN 10278 for cold-drawn squares.
  • 02Square bar is ordered by side length (a); if a specific corner radius is required, state it in the enquiry.
  • 03In chloride-bearing environments (sea air, salt water) choose 316 / 316L; for atmospheric service and food equipment, 304 is usually sufficient.

Other Types

Stainless Steel Square Bar: grades, standards and selection notes

This page covers Stainless Steel Square Bar, part of our Stainless Steel Bars range. Grades named for this type: 1.4301 (304) · 1.4401 (316) · 304L / 316L on request. It is supplied to EN 10088-3 (stainless steel bars, rods, wire and sections for general purposes), ASTM A276 (stainless steel bars and shapes) and ASTM A479 (stainless steel bars and shapes for boilers and other pressure vessels).

The grades and their chemistry are the same as for round bar (304/1.4301, 316L/1.4404 and related grades); the full values are on the grade datasheets linked below. Finish and tolerance options in the table: Hot rolled, solution annealed, pickled – EN 10059; Cold drawn – h11 (EN 10278).

A square bar is ordered by its side length a; the diagonal is a × √2 ≈ 1.414 × a. With 7.9 kg/dm³ (1.4301, EN 10088-1) the mass is about 0.00790 × a² kg/m: a 50 mm square weighs about 19.8 kg/m. The square section provides ready flat faces for keys, guides and parts with square drives.

How the other types differ, according to their data: Stainless Steel Round Bar: hot-rolled tolerances EN 10060; tolerance h9 / h11 (ISO 286-2), on request. Stainless Steel Hexagon Bar: hot-rolled tolerances EN 10061. Stainless Steel Flat Bar: hot-rolled tolerances EN 10058; standards EN 10088-3, ASTM A276, ASTM A484. For this shape, hot-rolled bars are supplied to EN 10059 (dimensions and tolerances of hot-rolled square bars) and cold-drawn bars to h11 (EN 10278); state the shape and the standard together in an enquiry.

To request a quotation for Stainless Steel Square Bar, state the grade (for example X5CrNi18-10), size, tolerance class (h11 (ISO 286-2), on request), the standard (EN 10088-3), length and quantity. Material is supplied with an EN 10204 3.1 inspection certificate; third-party inspection by bodies such as SGS, Bureau Veritas or TÜV is arranged on request. Whether the size can be supplied from stock, the minimum quantity and the lead time are stated in the quotation, which is sent within 24 hours.

Grade datasheets

Chemistry, mechanical properties and equivalents of the steel grades used for this product:

Grade comparisons

What are stainless steel bars?

Stainless steel bars are long products of corrosion-resistant steel with at least 10.5% chromium, in round, hexagon, square or flat section (EN 10088-1).

Stainless Steel Bars: guide and FAQ

Get a Quote

Contact our expert team for pricing and delivery.

Get a Quote

Related Production Processes