Stainless Steel Bars / SS-FLT

Stainless Steel Flat Bar

Stainless flat bar for brackets, connecting straps and plant structures, ordered as width × thickness. Supplied in 1.4301 (304) and 1.4401 (316), plus 1.4307 (304L) and 1.4404 (316L) on request, hot rolled or cold drawn.

Technical Specifications

Grades
1.4301 (304) · 1.4401 (316) · 304L / 316L on request
Tolerance
h11 (ISO 286-2), on request
Size
Width × thickness on request — confirmed in the quotation
Standards
EN 10088-3, ASTM A276, ASTM A484

Key Features

  • Specified as width × thickness; suited to cutting, drilling and bending
  • Grades 1.4301 (304) and 1.4401 (316), plus 1.4307 (304L) and 1.4404 (316L) on request
  • To EN 10088-3 or ASTM A276 (general requirements for bars: ASTM A484)
  • Hot rolled (EN 10058) or cold drawn h11 (EN 10278) — on request
  • EN 10204 3.1 inspection certificate; third-party inspection by bodies such as SGS, Bureau Veritas or TÜV on request
  • Supplied from stock or from production partners; stock status for the grade and size, quantity and lead time are confirmed in the quotation

Applications

  • Brackets, connecting straps and supports
  • Platform and structural parts in food, beverage and chemical plants
  • Fixings for marine service (316 / 316L)
  • Architectural and decorative work

Finish and Tolerance Options

Surface / processTolerance (on request)Notes
Hot rolled, solution annealed, pickledEN 10058Ordered as width × thickness
Cold drawnh11 (EN 10278)Bright surface; tight width and thickness tolerance

Technical Notes

  • 01Tolerances are defined by EN 10058 for hot-rolled and by EN 10278 for cold-drawn flats.
  • 02Flat bar is ordered as width × thickness; state in the enquiry whether rolled edges or cut edges are required.
  • 03In welded structures, low-carbon 304L / 316L reduces the risk of intergranular corrosion.

Stainless Steel Flat Bar: grades, standards and selection notes

This page covers Stainless Steel Flat Bar, part of our Stainless Steel Bars range. Grades named for this type: 1.4301 (304) · 1.4401 (316) · 304L / 316L on request. It is supplied to EN 10088-3 (stainless steel bars, rods, wire and sections for general purposes), ASTM A276 (stainless steel bars and shapes) and ASTM A484 (general requirements for stainless steel bars, billets and forgings).

The grades and their chemistry are the same as for round bar (304/1.4301, 316L/1.4404 and related grades); the full values are on the grade datasheets linked below. Finish and tolerance options in the table: Hot rolled, solution annealed, pickled – EN 10058; Cold drawn – h11 (EN 10278).

A flat bar is ordered as width × thickness (b × t); with the 7.9 kg/dm³ density of 1.4301 (EN 10088-1) the mass is about 0.0079 × b × t kg/m (b and t in mm): a 50 × 10 mm flat weighs about 3.95 kg/m. Flats are cut and drilled into brackets, frames and connection plates.

How the other types differ, according to their data: Stainless Steel Round Bar: hot-rolled tolerances EN 10060; tolerance h9 / h11 (ISO 286-2), on request; standards EN 10088-3, ASTM A276, ASTM A479. Stainless Steel Hexagon Bar: hot-rolled tolerances EN 10061; standards EN 10088-3, ASTM A276, ASTM A479. Stainless Steel Square Bar: hot-rolled tolerances EN 10059; standards EN 10088-3, ASTM A276, ASTM A479. For this shape, hot-rolled bars are supplied to EN 10058 (dimensions and tolerances of hot-rolled flat bars for general purposes) and cold-drawn bars to h11 (EN 10278); state the shape and the standard together in an enquiry.

To request a quotation for Stainless Steel Flat Bar, state the grade (for example X5CrNi18-10), size, tolerance class (h11 (ISO 286-2), on request), the standard (EN 10088-3), length and quantity. Material is supplied with an EN 10204 3.1 inspection certificate; third-party inspection by bodies such as SGS, Bureau Veritas or TÜV is arranged on request. Whether the size can be supplied from stock, the minimum quantity and the lead time are stated in the quotation, which is sent within 24 hours.

Grade datasheets

Chemistry, mechanical properties and equivalents of the steel grades used for this product:

Grade comparisons

What are stainless steel bars?

Stainless steel bars are long products of corrosion-resistant steel with at least 10.5% chromium, in round, hexagon, square or flat section (EN 10088-1).

Stainless Steel Bars: guide and FAQ

Get a Quote

Contact our expert team for pricing and delivery.

Get a Quote

Related Production Processes