Steel Grade Comparison
Compare chemical composition, mechanical properties and application differences between EN, AISI, ASTM and DIN steel grades with detailed tables.
How to use these comparisons
Steel grades are specified in several national and international systems: European EN designations such as C45, 42CrMo4 or S355J2 with their material numbers (1.0503, 1.7225, 1.0577), American AISI/SAE and ASTM grades such as 1045, 4140, A105 or A572, and Japanese JIS and Chinese GB grades. When a drawing, a project specification or a stock list uses a different system, the grade often has to be translated into another one. Each comparison on this page sets two closely related grades side by side: the chemical composition limits of the heat analysis, minimum mechanical properties, typical applications, the governing standards and the equivalent designations in other systems.
Equivalent does not mean identical. Limits for carbon, manganese, phosphorus and sulphur often differ slightly, and mechanical values depend on the delivery condition (for example normalized or quenched and tempered) and on the section size. Before replacing one grade with another, check the requirements of the governing standard and of your project, and ask for the heat analysis and test results on the inspection certificate (EN 10204 3.1). The figures shown here are guide values from the standards; the order specification and the certificate are binding.
42CrMo4 vs 4140
EN vs AISI Chromium-Molybdenum Q&T Steel
34CrNiMo6 vs 4340
EN vs SAE Nickel-Chromium-Molybdenum Q&T Steel
C45 vs 1045
EN vs AISI Medium-Carbon Q&T Steel
16MnCr5 vs 5115
EN vs SAE Mn-Cr Case Hardening Steel
100Cr6 vs 52100
EN vs SAE High-Carbon Chromium Bearing Steel
S235JR vs A36
EN vs ASTM General Structural Steel
S355J2 vs A572 Gr.50
EN vs ASTM High-Strength Structural Steel
304 vs 316L
Austenitic Stainless: Cr-Ni vs Cr-Ni-Mo
316L vs 1.4404
AISI vs EN Austenitic Stainless Steel
A105 vs P250GH
ASTM vs EN Forging Carbon Steel
