Stainless Steel Hexagon Bar
Stainless hexagon bar for nuts, unions and fittings, machined with less waste than round stock. Supplied in 1.4301 (304) and 1.4401 (316), plus 1.4307 (304L) and 1.4404 (316L) on request, hot rolled or cold drawn.
Technical Specifications
Key Features
- Hexagon section reduces machining waste for nuts, unions and similar parts
- Grades 1.4301 (304) and 1.4401 (316), plus 1.4307 (304L) and 1.4404 (316L) on request
- To EN 10088-3 or ASTM A276 / A479
- Hot rolled (EN 10061) or cold drawn h11 (EN 10278) — on request
- EN 10204 3.1 inspection certificate; third-party inspection by bodies such as SGS, Bureau Veritas or TÜV on request
- Supplied from stock or from production partners; stock status for the grade and size, quantity and lead time are confirmed in the quotation
Applications
- Nuts and unions
- Hydraulic and pneumatic fittings
- Valve and instrumentation connectors
- Fittings for food and chemical plants
Finish and Tolerance Options
| Surface / process | Tolerance (on request) | Notes |
|---|---|---|
| Hot rolled, solution annealed, pickled | EN 10061 | Size is measured across flats (s) |
| Cold drawn | h11 (EN 10278) | Near-net stock for nuts, unions and fittings |
Technical Notes
- 01Hexagon size is the distance across flats (s); the across-corners dimension is about 1.155 × s.
- 02Tolerances are defined by EN 10061 for hot-rolled and by EN 10278 for cold-drawn hexagons.
- 03For fittings that will be welded, low-carbon 304L / 316L is preferred; in chloride-bearing service, 316 / 316L.
Stainless Steel Hexagon Bar: grades, standards and selection notes
This page covers Stainless Steel Hexagon Bar, part of our Stainless Steel Bars range. Grades named for this type: 1.4301 (304) · 1.4401 (316) · 304L / 316L on request. It is supplied to EN 10088-3 (stainless steel bars, rods, wire and sections for general purposes), ASTM A276 (stainless steel bars and shapes) and ASTM A479 (stainless steel bars and shapes for boilers and other pressure vessels).
The grades and their chemistry are the same as for round bar (304/1.4301, 316L/1.4404 and related grades); the full values are on the grade datasheets linked below. Finish and tolerance options in the table: Hot rolled, solution annealed, pickled – EN 10061; Cold drawn – h11 (EN 10278).
A hexagon is ordered by the width across flats s; the width across corners is s ÷ cos 30° ≈ 1.155 × s, which is also the smallest round diameter from which the same hexagon could be machined. With 7.9 kg/dm³ (1.4301, EN 10088-1) the mass is about 0.00684 × s² kg/m: a 50 mm hexagon weighs about 17.1 kg/m.
How the other types differ, according to their data: Stainless Steel Round Bar: hot-rolled tolerances EN 10060; tolerance h9 / h11 (ISO 286-2), on request. Stainless Steel Square Bar: hot-rolled tolerances EN 10059. Stainless Steel Flat Bar: hot-rolled tolerances EN 10058; standards EN 10088-3, ASTM A276, ASTM A484. For this shape, hot-rolled bars are supplied to EN 10061 (dimensions and tolerances of hot-rolled hexagon bars) and cold-drawn bars to h11 (EN 10278); state the shape and the standard together in an enquiry.
To request a quotation for Stainless Steel Hexagon Bar, state the grade (for example X5CrNi18-10), size, tolerance class (h11 (ISO 286-2), on request), the standard (EN 10088-3), length and quantity. Material is supplied with an EN 10204 3.1 inspection certificate; third-party inspection by bodies such as SGS, Bureau Veritas or TÜV is arranged on request. Whether the size can be supplied from stock, the minimum quantity and the lead time are stated in the quotation, which is sent within 24 hours.
Grade datasheets
Chemistry, mechanical properties and equivalents of the steel grades used for this product:
Grade comparisons
What are stainless steel bars?
Stainless steel bars are long products of corrosion-resistant steel with at least 10.5% chromium, in round, hexagon, square or flat section (EN 10088-1).
Stainless Steel Bars: guide and FAQRelated Blog Posts
Technical articles, guides and industry analyses
Is Steel Magnetic? Which Steels Are Not Magnetic?
The vast majority of steels are magnetic — but not all. What decides it is not the alloy but the crystal structure: ferrite/martensite attracts, austenite doesn't. Why 304/316 stainless doesn't stick, and where the magnet test reaches its limits.

h9, h10, h11 Tolerances for Bright Steel Bars: How to Choose
For bright bars, h9, h10 and h11 are ISO 286 shaft tolerance classes: the upper deviation is zero and the lower deviation is negative, depending on diameter. We explain which production route gives which tolerance, what the difference between h9 and h11 means in microns, and what else must be written on the order next to the tolerance.
