Tee Fitting
Used to branch off a main line or to connect two pipelines together.
Technical Specifications
Key Features
- Even flow distribution
- High mechanical strength
- Low turbulence
- Easy weldability
- Standard dimensions
- Available in straight and reducing types
Applications
- Line branching
- System connection
- Instrumentation lines
- Sampling points
- Valve connections
- Equipment interfaces
Dimension Table
| Size | Outside Diameter (mm) | Thickness (mm) | Center to End C, run (mm) | Center to End M, outlet (mm) |
|---|---|---|---|---|
| 1/2" | 21.3 | 2.77 | 25 | 25 |
| 1" | 33.4 | 3.38 | 38 | 38 |
| 2" | 60.3 | 3.91 | 64 | 64 |
| 4" | 114.3 | 6.02 | 105 | 105 |
| 6" | 168.3 | 7.11 | 143 | 143 |
| 8" | 219.1 | 8.18 | 178 | 178 |
Technical Notes
- 01Available in equal and reducing types.
- 02If branch diameter is smaller, use reducing tee.
- 03Weld quality is critical in high-pressure systems.
Butt-weld tee: equal and reducing branches
A tee splits or combines flow through a 90° branch. In an equal (straight) tee the branch is the same size as the run; in a reducing tee the branch is smaller, which ASME B16.9 writes as run × run × branch, for example 6 × 6 × 4. Seamless and welded tees are formed by hydraulic bulging or extrusion, and B16.9 fittings are rated like straight seamless pipe of the same material and wall thickness.
Dimensions (centre-to-end of run and outlet) follow ASME B16.9 for NPS 1/2 to 48 and EN 10253 in metric systems; forged socket-weld and threaded tees to ASME B16.11 serve the small bores. Typical grades are A234 WPB, A420 WPL6, A403 WP304L/WP316L and A234 WP11/WP22, matched to the pipe schedule.
A tee is the right choice when the branch is the same size as the run or only slightly smaller; when the branch is much smaller, a branch outlet such as a weldolet or sockolet welded onto the run is often lighter and cheaper. On pigged lines specify a barred tee so the pig is not diverted into the branch. Dedicated pages for equal and reducing tees, with their dimension tables, are listed under related products below.
Related products
Grade datasheets
Chemistry, mechanical properties and equivalents of the steel grades used for this product:
Grade comparisons
What are pipe fittings?
Pipe fittings are the components that change direction, branch, reduce or terminate a pipeline: elbows (90°/45°), tees, reducers, caps and crosses.
Pipe Fittings: guide and FAQRelated Blog Posts
Technical articles, guides and industry analyses

A105 vs A350 LF2: Which Flange Material for Low Temperatures?
A105 and A350 LF2 are two forged carbon steels of the same strength; the real difference is impact testing. LF2 Class 1 is guaranteed by a notch impact test at −46 °C, while A105 has no mandatory impact test. Chemistry and mechanical table, the window that meets both standards, and a flange–pipe–fitting set by design temperature.

Matching Fittings and Flanges to Pipe Schedule: SCH 80, SCH 160, XXS
Schedule is the pipe's wall thickness; fittings and flanges carry the same information in different ways. On butt-weld fittings the schedule follows the pipe, on socket-weld and threaded fittings the class does, and on weld neck flanges the bore does. We put the matching rules for SCH 160 and XXS lines and our calculated weight table in one place.
