Matching Fittings and Flanges to Pipe Schedule: SCH 80, SCH 160, XXS
Schedule is the pipe's wall thickness; fittings and flanges carry the same information in different ways. On butt-weld fittings the schedule follows the pipe, on socket-weld and threaded fittings the class does, and on weld neck flanges the bore does. We put the matching rules for SCH 160 and XXS lines and our calculated weight table in one place.
🧮 Wall thickness for every schedule: DN-NPS Conversion tool → · Products: Fittings · Weld neck flange · Olet branch fittings
Short Answer
Schedule (SCH) defines the wall thickness of a pipe; in fitting and flange orders the same information travels in three different forms. Butt-weld fittings (ASME B16.9) are ordered with the schedule of the pipe they join: an SCH 160 elbow for SCH 160 pipe. Socket-weld and threaded fittings (ASME B16.11) carry no schedule; instead you choose a class (2000, 3000, 6000, 9000), and the class is tied to the pipe wall through a table in the standard. On a weld neck flange, Class 150–2500 is the pressure class, while the flange bore is specified separately to suit the pipe schedule.
If any one of these three items is missing, the result on site is the same: a weld bevel that does not match the wall, or a flange bore that does not line up with the pipe ID. This article puts the matching rules in one place, with a focus on heavy-wall SCH 160 and XXS lines.
Three Separate Ideas: Schedule, Fitting Class and Flange Class
Most of the confusion in material lists comes from using these three ideas interchangeably:
| Concept | What it defines | Standard | How it is written in an order |
|---|---|---|---|
| Schedule / wall designation | Wall thickness of pipe and butt-weld fittings | ASME B36.10M (carbon and alloy pipe) | NPS 2 SCH 160 |
| Fitting class | Pressure class of socket-weld and threaded fittings | ASME B16.11 | Socket-weld elbow, NPS 1, Class 6000 |
| Flange pressure class | Pressure–temperature rating of the flange | ASME B16.5 (NPS ½–24) | WN RF, NPS 4, Class 900 |
Schedule and flange class are independent. The flange class comes from design pressure and temperature; the pipe wall is chosen from the pressure calculation plus allowances such as corrosion and thread depth. There is no rule such as "SCH 160 pipe needs Class 1500 flanges". To pick a class from a material's pressure–temperature table you can use the Pressure Class tool.
Butt-Weld Fittings (ASME B16.9): Same Schedule as the Pipe
B16.9 does not give fitting ratings in a separate table. A fitting is treated as equivalent to straight seamless pipe of the same material and the same nominal wall thickness. That is why elbows, tees, reducers and caps are ordered with the schedule of the pipe they connect to. If no schedule is written, the supplier has to assume a wall thickness. If the assumption is STD (standard wall), on an SCH 160 line that means several millimetres of mismatch at the weld bevel.
Three points to watch:
- Wall tolerance: B16.9 requires the wall thickness at any point of the fitting to be at least 87.5% of nominal. The mill tolerance of pipe is likewise on the minus side. The body may be thicker, but the wall at the weld bevel must match the pipe.
- Unequal wall thickness: If fitting and pipe have different schedules, the bores are offset. Piping codes (e.g., ASME B31.3) then require the thicker side to be taper-bored to give a gradual transition. That is extra work; ordering the right schedule avoids it from the start.
- Bore: Heavy walls noticeably reduce the bore. NPS 2 SCH 160 pipe has a bore of about 42.8 mm, dropping to 38.2 mm in XXS. On lines that are pigged, or where flow calculations are tight, bore continuity is checked separately.
For our butt-weld fitting families: 90° elbow, tee and reducer.
Socket-Weld and Threaded Fittings (ASME B16.11): The Class Table
For the forged fittings used in small bores (usually NPS 2 and below), wall thickness is defined by class, not by schedule. B16.11 gives a correlation table that shows which class corresponds to which pipe wall:
| Pipe wall | Socket-weld fitting | Threaded fitting |
|---|---|---|
| SCH 80 / XS | Class 3000 | Class 2000 |
| SCH 160 | Class 6000 | Class 3000 |
| XXS | Class 9000 | Class 6000 |
Source: ASME B16.11, correlation of fitting class with pipe schedule (used for rating calculations).
The threaded column is shifted one step because of thread depth. Cutting a thread removes part of the pipe wall, so a threaded fitting used with the same pipe reads one class lower than a socket-weld fitting: SCH 160 pipe corresponds to socket-weld Class 6000 and threaded Class 3000. If a list says "SCH 160 socket-weld tee", the supplier has to translate it into a class. Writing the class directly removes that interpretation.
Weld Neck Flanges: Class Is One Thing, Bore Is Another
The outside dimensions of a weld neck flange (outside diameter, bolt circle, thickness) are fixed in B16.5 by NPS and class. The bore at the end of the hub is specified by the purchaser, because it has to match the pipe ID. The correct way to write it is therefore WN RF, NPS 4, Class 900, bore SCH 160. If the bore is not given, the supplier has to assume a wall thickness. If the assumed bore is larger than that of the heavy-wall pipe, you get an internal step at the weld bevel.
On a slip-on flange the bore is machined to the pipe OD, so the schedule is not decisive there. On a socket-weld flange the socket follows the pipe OD and the bore at the bottom of the socket follows the pipe wall. You will find flange outside dimensions in the Flange Dimensions tool, and the differences between flange types in our ASME B16.5 guide.
SCH 160 or XXS: Which Is Thicker?
The most common mistake on heavy-wall lines is assuming that XXS is the thickest wall in every size. The table below puts the B36.10M wall thicknesses side by side. We calculated the weights.
| NPS (DN) | OD (mm) | SCH 80 / XS wall (mm) | SCH 160 wall (mm) | XXS wall (mm) | SCH 160 kg/m | XXS kg/m | Thicker |
|---|---|---|---|---|---|---|---|
| ½ (15) | 21.3 | 3.73 | 4.78 | 7.47 | 1.95 | 2.55 | XXS |
| ¾ (20) | 26.7 | 3.91 | 5.56 | 7.82 | 2.90 | 3.64 | XXS |
| 1 (25) | 33.4 | 4.55 | 6.35 | 9.09 | 4.24 | 5.45 | XXS |
| 1½ (40) | 48.3 | 5.08 | 7.14 | 10.15 | 7.25 | 9.55 | XXS |
| 2 (50) | 60.3 | 5.54 | 8.74 | 11.07 | 11.11 | 13.44 | XXS |
| 3 (80) | 88.9 | 7.62 | 11.13 | 15.24 | 21.35 | 27.68 | XXS |
| 4 (100) | 114.3 | 8.56 | 13.49 | 17.12 | 33.54 | 41.03 | XXS |
| 6 (150) | 168.3 | 10.97 | 18.26 | 21.95 | 67.57 | 79.22 | XXS |
| 8 (200) | 219.1 | 12.70 | 23.01 | 22.23 | 111.27 | 107.93 | SCH 160 |
| 10 (250) | 273.1 | 12.70 | 28.58 | 25.40 | 172.34 | 155.16 | SCH 160 |
| 12 (300) | 323.9 | 12.70 | 33.32 | 25.40 | 238.78 | 186.98 | SCH 160 |
Wall thicknesses: ASME B36.10M. Weights are calculated: kg/m = 0.02466 × t × (D − t), steel density 7.85 g/cm³, t and D in mm. At NPS 10 and 12, XS (12.70 mm) is thinner than SCH 80; these rows show the XS value.
The conclusion: up to NPS 6, XXS is thicker than SCH 160; from NPS 8 upwards it is the other way round. At NPS 10 the difference exceeds 3 mm, at NPS 12 it is about 8 mm (7.92 mm). If a quotation says "XXS or SCH 160, whichever is thicker", read it against this boundary for the size in question. With heavy-wall fittings, weight drives freight and handling costs directly. You can check total tonnage with the Weight Calculator.
Branch Connections: the Same Logic for Olets
The same distinction applies to olet fittings used to take a small branch off a run pipe. A weldolet is ordered with the wall of the branch pipe (STD, XS, SCH 160, XXS). A sockolet and a threadolet are defined by class. Olets have their own dimensional standard, MSS SP-97, and the class correlation should be taken from that standard's table. See our olet selection guide for details.
What to Write in the Specification
A complete material list for a heavy-wall line carries this information on every item:
- Pipe: material and grade, NPS, schedule (or wall in mm), seamless/welded, end type (plain or B16.25 bevel).
- Butt-weld fitting: type (90° LR elbow, etc.), NPS, schedule, material (e.g., ASTM A234 WPB), dimensional standard ASME B16.9, seamless/welded.
- Socket-weld / threaded fitting: type, NPS, class (3000/6000/9000 or 2000/3000/6000), material (e.g., ASTM A105), ASME B16.11.
- Flange: type (WN, SO, SW, blind), NPS, class, facing (RF, RTJ), material, schedule for the bore, ASME B16.5.
- Documents: EN 10204 3.1 inspection certificate; where needed, third-party inspection such as SGS, Bureau Veritas or TÜV.
Material selection has its own guide: A234 WPB vs WP11 vs WP22. For fitting and flange grades on stainless lines, see the 316L datasheet.
Frequently Asked Questions
Which socket-weld fitting class is used with SCH 160 pipe?
According to the correlation table in ASME B16.11, SCH 160 pipe corresponds to Class 6000 for socket-weld fittings and Class 3000 for threaded fittings. SCH 80 / XS pipe uses Class 3000 socket-weld and Class 2000 threaded.
Is XXS always thicker than SCH 160?
No. Under ASME B36.10M, XXS is thicker up to NPS 6. At NPS 8, 10 and 12, SCH 160 is thicker; at NPS 8, for example, SCH 160 is 23.01 mm and XXS 22.23 mm.
Why is the schedule written separately on a weld neck flange?
The class sets the outside dimensions and the pressure rating, but the bore at the end of the hub has to match the pipe ID. ASME B16.5 leaves that dimension to the purchaser; if it is not given, the bore may not match the pipe.
What happens if the fitting has a different schedule from the pipe?
The bores are offset at the weld bevel and a step forms at the weld root. Piping codes then require the thicker side to be taper-bored for a gradual transition. Ordering the same schedule avoids that extra work.
Supply from Aktif Çelik
We supply butt-weld fittings, flanges and olet branch fittings in the wall thickness you need, including SCH 160 and XXS, with an EN 10204 3.1 inspection certificate. Send your material list together with the pipe items and we will check schedule, class and bore on every fitting and flange line before we quote. Quotations go out within 24 hours; lead time and minimum quantity vary by product and are stated in the quotation.
🔗 See also: Quality & Certificates · Flange Types Guide
Detailed Technical Info & Quotation
Contact our expert team for detailed technical documents, application recommendations, and custom dimension quotes on this topic.

