Technical Specifications
Key Features
- Complete sealing
- High pressure resistance
- Easy installation
- Long service life
- Standard sizes
- Various connection types
Applications
- Pipeline ends
- Future extensions
- Test points
- Maintenance closures
- Tank connections
- Equipment ends
Dimension Table
| Size | Outside Diameter (mm) | Thickness (mm) | Length (mm) | Type |
|---|---|---|---|---|
| 1/2" | 21.3 | 2.77 | 25 | Butt Weld |
| 1" | 33.4 | 3.38 | 38 | Butt Weld |
| 2" | 60.3 | 3.91 | 38 | Butt Weld |
| 4" | 114.3 | 6.02 | 64 | Butt Weld |
| 6" | 168.3 | 7.11 | 89 | Butt Weld |
| 8" | 219.1 | 8.18 | 102 | Butt Weld |
Technical Notes
- 01Available in butt weld, socket weld, and threaded types.
- 02Thickness should be increased for high pressure applications.
- 03Cap material must match the pipe material.
Pipe cap: closing the end of a line for good
A pipe cap closes the end of a pipe permanently. Butt-weld caps to ASME B16.9 have a dished, approximately elliptical shape and are welded directly to the pipe; socket-weld and threaded caps to ASME B16.11 close small-bore lines, vents and drains. Unlike a blind flange, a welded cap cannot be removed without cutting, so it suits dead ends, future extension points that will be cut open later, and header ends.
The cap is ordered in the same size, schedule and material as the pipe: A234 WPB, A420 WPL6, A403 WP304L/WP316L or Cr-Mo grades such as A234 WP11. ASME B16.9 sets the cap length (dimension E) for each size and wall thickness, and EN 10253 covers caps for metric pipe. Heavier walls may need a longer cap, so check the dimension table when the schedule is XS or above.
If the line end has to be opened for cleaning, inspection or pigging, choose a blind flange or a quick-opening closure instead. Larger closures on tanks and pressure vessels are formed heads rather than caps; see the elliptical head and flat cap pages in the caps and heads family.
Related products
What are pipe fittings?
Pipe fittings are the components that change direction, branch, reduce or terminate a pipeline: elbows (90°/45°), tees, reducers, caps and crosses.
Pipe Fittings: guide and FAQRelated Blog Posts
Technical articles, guides and industry analyses

A105 vs A350 LF2: Which Flange Material for Low Temperatures?
A105 and A350 LF2 are two forged carbon steels of the same strength; the real difference is impact testing. LF2 Class 1 is guaranteed by a notch impact test at −46 °C, while A105 has no mandatory impact test. Chemistry and mechanical table, the window that meets both standards, and a flange–pipe–fitting set by design temperature.

Matching Fittings and Flanges to Pipe Schedule: SCH 80, SCH 160, XXS
Schedule is the pipe's wall thickness; fittings and flanges carry the same information in different ways. On butt-weld fittings the schedule follows the pipe, on socket-weld and threaded fittings the class does, and on weld neck flanges the bore does. We put the matching rules for SCH 160 and XXS lines and our calculated weight table in one place.
