BS 970 – EN steel equivalents
In the UK, India and many markets used to British standards, engineering steels are still referred to by BS 970 names (708M40, 817M40) or the older “EN” numbers (EN8, EN19, EN24). Most of BS 970 has been replaced by European standards (EN 10083, EN 10084, EN ISO 683), but the names live on in enquiries.
BS 970 – EN – AISI equivalence table
Click a grade name to open its datasheet.
| EN | W.-Nr. | BS 970 | Old EN no. | AISI/SAE |
|---|---|---|---|---|
| 42CrMo4 | 1.7225 | ≈ 708M40 / 709M40 | EN19A / EN19 | 4140 |
| C45 | 1.0503 | ≈ 080M46 | — | 1045 |
| 16MnCr5 | 1.7131 | ≈ 527A17 | — | 5115 |
| 34CrNiMo6 | 1.6582 | 817M40 | EN24 | ≈ 4340 |
| 100Cr6 | 1.3505 | 534A99 | EN31 | 52100 |
| C15 | 1.0401 | ≈ 040A15 | EN32 | ≈ 1015 / 1018 |
| 20NiCrMo2-2 | 1.6523 | ≈ 805M20 | EN362 | 8620 |
| 11SMn30 | 1.0715 | ≈ 220M07 | — | 1213 |
| 51CrV4 | 1.8159 | ≈ 735A50 | EN47 | 6150 |
| 39NiCrMo3 | 1.6510 | ≈ 640M40 | EN111 | ≈ 9840 |
| 20MnCr5 | 1.7147 | ≈ 590M17 | — | 5120 |
| 41Cr4 | 1.7035 | ≈ 530M40 | EN18 | ≈ 5140 |
| C40 | 1.0511 | ≈ 080M40 | EN8 | ≈ 1040 |
| 34CrMo4 | 1.7220 | ≈ 708A37 | — | ≈ 4135 |
| C22E | 1.1151 | ≈ 070M20 | EN3B | ≈ 1020 |
| X5CrNi18-10 | 1.4301 | 304S31 | — | 304 |
| X2CrNiMo17-12-2 | 1.4404 | 316S11 | — | 316L |
| 55Cr3 | 1.7176 | ≈ 527A60 | — | ≈ 5155 / 5160 |
| C55 | 1.0535 | ≈ 070M55 | EN9 | ≈ 1055 |
| 50CrMo4 | 1.7228 | ≈ 708A47 | — | ≈ 4150 |
| 36CrNiMo4 | 1.6511 | ≈ 816M40 | EN110 | ≈ 9840 |
| 17NiCrMo6-4 | 1.6566 | ≈ 815M17 | EN353 | — |
Structural steels such as S235JR and S355J2 are not covered by BS 970; their former UK counterparts were in BS 4360 (now BS EN 10025). They are therefore not listed in the table; their equivalents are on the datasheet pages.
Equivalents are given for information; analysis ranges may differ slightly from one standard to another. For critical parts, the standard named in your order governs. “≈” marks the nearest grade where no strict equivalent exists.
Rows are generated from the same data as the steel grade datasheets on this site.
How to read BS 970 designations
- The six-character name has three parts: three digits for the steel type, a letter for the supply basis and the carbon content in hundredths of a percent: 708M40 → Cr-Mo steel, supplied to mechanical properties, ≈ 0.40 % C.
- Letter: A = to chemical analysis, M = to mechanical properties, H = to hardenability, S = stainless steel.
- 000–199 are carbon and carbon-manganese steels; the digits give the manganese content in hundredths of a percent: 080M40 → ≈ 0.80 % Mn.
- 200–240 are free-cutting steels; the digits relate to the sulphur content: 220M07.
- 500–999 are alloy steels: 5xx chromium, 6xx nickel-chromium, 7xx chromium-molybdenum and chromium-vanadium, 8xx nickel-chromium-molybdenum (e.g. 534A99, 640M40, 708M40, 735A50, 817M40).
- Old numbers such as EN8, EN19 and EN24 are serial numbers and do not encode composition. Note: this “EN” is not a European Standard such as EN 10083.
You can send your enquiry using the BS 970 designation; we confirm the EN counterpart.
Send us your requirements
Tell us the grade, size and quantity — our team will get back to you within 24 hours.
