Ring Gaskets / RTJ-N
N Type Square Ring Gasket
Square section ring joint gasket designed for general and medium-pressure applications. NORSOK compliant with easy manufacturing and installation.
Technical Specifications
Key Features
- Square section profile
- High contact pressure
- Economical manufacturing
- Easy installation
- Standard compatibility
- Versatile use
Applications
- Medium pressure systems
- HVAC pipelines
- Water lines
- General industrial use
- Fluid transfer lines
- Ventilation systems
Dimension Table
| Size | Outside Diameter (mm) | id | Width (mm) | Groove |
|---|---|---|---|---|
| 1" | 60.5 | 35.1 | 11.2 | R-11 |
| 2" | 79.2 | 53.8 | 11.2 | R-11 |
| 4" | 127.0 | 101.6 | 11.2 | R-11 |
| 8" | 200.2 | 174.8 | 11.2 | R-11 |
Technical Notes
- 01Economic alternative to oval rings.
- 02Simple to produce and install.
- 03Can be reused after inspection.
- 04Ideal for medium pressure service.
Other Types
What is a ring joint gasket (RTJ)?
A ring joint gasket (RTJ) is a metallic sealing ring that seals flange connections at high pressure and temperature. The R series (oval and octagonal cross-sections) is made to ASME B16.20; the pressure-energized BX and RX series to API 6A. It is used with RTJ-faced flanges in pressure classes 150#–2500#.
How RTJ gaskets work and which type goes where
The RTJ gasket sits in a trapezoidal groove machined into the flange face; as the bolts are tightened the ring deforms plastically, creating line contact against the groove walls — a metal-to-metal joint that stays tight even at very high pressure. The gasket material is therefore always chosen softer than the flange (soft iron, low-carbon steel, 304/316 stainless, alloys): the gasket must deform, not the groove. The oval section also suits older round-bottom grooves; the octagonal section seals better in modern flat-bottom grooves. RX is a pressure-energized type that fits the standard R groove; BX serves API 6A wellhead and christmas-tree applications up to 20,000 psi. RTJ gaskets are standard in oil & gas, refining and petrochemicals.
Frequently Asked Questions
Oval vs octagonal ring gasket — what is the difference?+
They differ in cross-section: oval also fits older round-bottom grooves; octagonal gives wider contact and a better seal in modern flat-bottom grooves. Both are R-series and share the same groove dimensions (B16.20).
Where are BX ring gaskets used?+
BX is for high-pressure API 6A wellhead and christmas-tree flanges; it provides pressure-energized sealing up to 20,000 psi and fits only BX-grooved flanges.
Can an RTJ gasket be reused?+
No. Sealing relies on plastic deformation of the ring, so a removed gasket has lost its dimensions and surface finish; a new gasket is fitted at every assembly.
How is RTJ gasket material selected?+
The gasket must be softer than the flange so deformation happens in the gasket, not the groove. Typical picks: soft iron/low-carbon steel for carbon steel flanges, 304/316 for stainless systems, suitable alloys for corrosive service.
Related Blog Posts
Technical articles, guides and industry analyses
Flange Types Guide: The 7 Main Flange Types and How to Choose
We explain weld neck, slip-on, blind, socket weld, threaded, lap joint and orifice flanges — their construction, facing types (RF/FF/RTJ), pressure classes and selection criteria.
ASME B16.5 Flange Standard: Comprehensive Technical Guide
Comprehensive technical guide to the ASME B16.5 flange standard. Pressure classes, flange types, material groups, and pressure-temperature ratings explained in detail.